The CCNP Candidate’s Guide to OSPF – INE Travis Bonfigli

Esoft

The CCNP Candidate’s Guide to OSPF – INE Travis Bonfigli
English | Size: 3.74 GB
Category: CBTs
In this tour de force on the Open Shortest Path First (OSPF) dynamic routing protocol for the Cisco Certified Networking Professional (CCNP)
candidate we will cover the basics of OSPF configuration and adjacencies, message types, Designated Router (DR)/Backup Designated Router (BDR) behavior,
Maximum Transmission Unit (MTU) semantics, timers,
the different OSPF network types such as point-to-point, point-to-multipoint, broadcast, non-broadcast, and point-to-multipoint non-broadcast,
OSPF in an L3 VPN environment as the Provider Edge (PE)-to-Customer Edge (CE) protocol, neighbor states, an exhaustive examination of the Link State Database (LSDB),
LSA types, traffic engineering with OSPF, summarization on Area Border Routers (ABRs) and Autonomous System Border/Boundary Routers (ASBRs), virtual links, the Stub,
Totally Stub, Not-so-Stubby, Totally Not-so-Stubby area types, OSPFv3, OSPFv3 with Address Families (AF), extensive use of Wireshark for packet capture and analysis,
OSPF authentication, Incremental Shortest Path First (ISPF), OSPF and MPLS in an MPLS BGP-free core, and a detailed look at OSPF RFCs 2328, 5340, and 5838.

Prerequisites:
Understand IPv4 & IPv6 concepts
Basic Understanding of OSPF
Desire to master OSPF!

Topic Covered in This Course:

Review of CCNA-level OSPF concepts
Configuration basics
Adjacencies
Message types
Neighbor states
Designated Router (DR) / Backup Designated Router (BDR)
Network Types:
Broadcast
Non-Broadcast
Point-to-Point
Point-to-Multipoint
Point-to-Multipoint Non-Broadcast
Troubleshooting scenarios
OSPF Timers
Link State Database (LSDB)
Link State Advertisements (LSAs)
Layer 3 Traffic Engineering OSPF v2 & v3
Multi-area OSPF
Autonomous System Boundary/Border Routers (ASBRs)
Area Border Routers (ABRs)
Redistribution

DOWNLOAD:

Tags: , , , ,

Leave a Reply